2M2208 Vertical deep hole honing machine

The machine features:

1. Large processing range (Φ12-Φ200mm)

2. The roundness of the workpiece can be up to 2-3um, the straightness can be less than 5um, and the finish is Ra0.2-0.4um.

3, speed control, brake easy to match adjustment honing netting

4, France Schneider Electric, with "manual" "automatic" "time" and other size control functions

6, the price of domestic machine, the performance of the imported machine, the vertical deep hole honing machine with high cost performance

The main technical parameters:

Processing aperture range: Φ12-Φ200mm

Maximum hole length: 1500mm

Spindle speed: 100-1200 rev / min Frequency conversion stepless speed regulation

Main motor: 5.7KW

Stroke length: 0-1500mm

Stroke speed: 40-300 times / min Frequency conversion stepless speed regulation

Shutdown brake for spindle and stroke: electronic brake of the inverter

Oil pump motor: 1.5KW

Fuel tank capacity: 150 liters

Machine weight: 2920KG

Dimensions: 1500*1300*5800 (length * width * height)

Power supply: 380V, 50Hz, three-phase four-wire

This machine is designed for the finishing of the inner hole. It is automatically stopped when it is ground to the set size. Each working cycle only needs 20-30 minutes (0.2-0.3mm margin), which is very suitable for the finishing of small and medium deep holes. .

Our equipment is guaranteed for one year, lifetime maintenance. Free on-site installation and commissioning, training, until it can operate independently.

Welcome to call us, thank you!

Ningbo Lineng Machinery

Mr. Fu   13567483966

FAX：   0574-86082668